Tenney Thermal Shock Junior Test Chamber
Product details
The Tenney Thermal Shock Junior Test chamber provides two opposite temperature extremes for accurate and efficient temperature cycling and thermal shock testing. It also has a fully automatic chamber control, which features an easy-to-read alphanumeric display.
Performance
-
Temperature range:
- Hot Chamber: +40°C to +200°C
- Cold Chamber: -68°C to +200°C
-
Carriage Capacity:
- 10.5” W x 6” H x 6.125” D
Product Details
The Tenney Thermal Shock Junior Test chamber provides two opposite temperature extremes for accurate and efficient temperature cycling and thermal shock testing. It also has a fully automatic chamber control, which features an easy-to-read alphanumeric display.
Performance
-
Temperature range:
- Hot Chamber: +40°C to +200°C
- Cold Chamber: -68°C to +200°C
-
Carriage Capacity:
- 10.5” W x 6” H x 6.125” D
Benefits & Features
Benefits
- Provides two opposite temperature extremes for accurate and efficient temperature cycling and thermal shock testing
- Fully automatic chamber control features easy-to-read alphanumeric display
- Cold chamber also serves as convenient full range test chamber
- Alerts user of low pressure, high pressure, and compressor motor-overloads
- The Tenney Thermal Shock Junior Test Chamber is a cost effective alternative to larger capacity units
- Ensures optimal product performance, meeting military standards MIL-STD-202G, MIL-STD-883 Method 1010, MILSTD-810 Method 503, MIL-STD-750 Method 1051, and more
Features
- TS2 Product Series includes standard Compound Air Flow System for maximizing air mixing, Semi-Pierced adjustable duct walls for airflow
- tunability, Hot Gas Defrost system for prolonged testing
- TSJR Product Series features an efficient Vertical-Down Airflow System
- 2-inch traveling port*
- Open-air, rapid-responding, low-mass, nichrome wire heating elements
- Two zone types with hot/cold compartment setups
- Smart1.2™ Control System with RS485 & Ethernet communications, on-board data logging, and graphical trend chart
- Cascade refrigeration system with TEV control and two semi-hermetic compressors
- Vapor-tight, interior liners made of 100% continuously welded stainless steel
- Vertical configurations**
- Fiberglass and polyurethane insulation ensures minimal thermal transfer
- Double-gasket doors provide additional insulation
- Door switch
- Limit switch
- Dual-carriage transport system with stainless steel, wire mesh basket
Options & Specifications
Options
- Viewing windows with chamber lights
- Various power configurations available
- Additional Wire Mesh Type Basket
- OTP TempGuard V per chamber
- Dry Air Purge System per chamber
- Main Power Disconnect
- IEEE Communications
- Remote Control and Monitoring Software
- Remote Air Cooled Condenser (TS2 models only)
- Datalogging Thermocouples
- Product Control Thermocouple
- LN2 Boost Cooling
Specifications
Controller Information
The Smart 1.2™ Control System applies Tenney’s proven environmental control technology with the ultimate in simplicity and versatility for total programming capabilities.
The main features of the Windows CE 7.0 Pro based PLC Smart 1.2 are the WSVGA 1024 X 600 high resolution graphical 7-inch touch screen, Smart 1.2 graphical user interface, 800 MHz Cortex A9 central processing unit, 4 GB (SD Card) flash storage, capable of storing up to 100 profiles with 100 steps each. Test Data retrieval and profile data transfer/sharing is accomplished through a local USB flash drive. Individual PID control loops allow for precise process control. A 100-ohm platinum RTD is used for temperature measurement and a dry capacitance type sensor is used for humidity measurement.
Features and Controls
- Real-time and historical color graph displays for temperature and humidity as well as set point values
- System can run in Single set point or Programmed modes
- Alarm, Program, and Datalog files can be easily transferred to and from controller via USB.
- Built-in TCP/IP networking via Ethernet 10/100 communication port
- Ethernet and RS485 communications are standard. RS232, & IEEE GPIB are all available as options.
- Built-in peripheral support expansion using the USB, providing an effective and flexible interface, for use with USB Keyboards, mouse and barcode scanners
- Analog signal re-transmit out to peripheral devices such as optional chart recorders
- Remote access via Smartphone, IPad, etc. with internet connection and VNC phone application
- 16 million display colors with a contrast ratio of 850:1
- 512MB DRAM and 1GB of Flash Memory
Not the product you're looking for?
Our product finder tool will help you search for the exact specifications you require.
