News

Read about the latest projects, events, and company updates for Tenney/Lunaire.

Showing 19 - 27 of 32 blog posts

Visit Tenney Environmental at the 2018 Space Tech Expo USA

Posted: May 09, 2018
Tenney Environmental is proud to announce its attendance at the West Coast’s premier space event, Space Tech Expo USA, in Pasadena, California on May 22-24, 2018. Space Tech Expo USA will feature over 250 exhibitors, offer a multitude of networking opportunities, and the chance to expand industry knowledge with free Open Tech Forum sessions. The expo has themes running over the three days focusing on Launch Systems – Addressing the Changing Landscape of the Launch Vehicle Industry ; Satellite Systems - Emerging Technologies and Drivers of Demand ; and Future Programs – Moving from Low Earth Orbit to a Deep

Tenney Environmental Ships Fast Change Rate Test Chamber to Automotive Industry

Posted: April 24, 2018
Tenney Environmental, a global manufacturer of environmental testing equipment, announced the shipment of three (3) Tenney Environmental Fast Change Rate Automotive Test Chambers . These test chambers will be used for temperature and humidity testing of automotive parts. The maximum temperature rating of the automotive test chambers is 180°C and the operating temperature range is -68°C to 180°C. The work chamber dimensions are 30” W X 28.8” D X 36” H. The fast change rate test chambers can transition the air temperature in remote chambers from 20°C to -40°C with a 30-minute transition rate. The automotive test chambers utilize a

Tenney Ships Environmental Walk-In Chamber to a Manufacturer of Consumer Products

Posted: February 19, 2018
Tenney announced the shipment of an environmental walk-in chamber to a manufacturer of consumer products. The walk-in room will be used for R&D environmental testing of products prior to going to market. The maximum temperature rating of the test chamber is 80°C with an operating temperature range of 0°C to 80°C. The walk-in chamber has work chamber dimensions of 119.5” W X 123.5” D X 102” H and ±5.0% humidity control after stabilization based on an empty chamber. The relative humidity range is 20%-95% RH in the temperature range of 20°C to 80°C limited by a 5°C dew point. The

Tenney Environmental Ships Vacuum Temperature Cycling Chamber to Aerospace Industry

Posted: January 25, 2018
Tenney Environmental announced the shipment of a Reach-In Vacuum Temperature Cycling Chamber to the aerospace industry. The temperature cycling chamber will be used for temperature altitude testing of aircraft collision avoidance radars. The operating temperature range of this vacuum chamber is -70°C to 177°C with temperature control of +/- 1°C. and the altitude range is to 100,000 feet +/-2 mmHg. The work chamber dimensions are 36” W X 36” D X 36” H and is constructed with type 304 stainless steel. The through wall ports are continuously welded and a combination of fiberglass and polyurethane insulation surrounds the chamber to

Tenney Environmental Ships Thermal Shock Chamber

Posted: January 19, 2018
Tenney Environmental announced the shipment of a Reach-In Thermal Shock Chamber to a research center for laboratory and technical R&D. The thermal shock chamber was purchased to run a variety of MIL-STD tests on various parts. The maximum temperature rating of the test chamber is 200°C with an operating temperature range of -73°C to 200°C in the bottom chamber and 65°C to 200°C in the top chamber. The work chamber dimensions of the chamber are 15” W X 15” D X 15” H, other sizes are available as well. The chamber features a 2-zone vertical air circulation and a control

Tenney Environmental Ships Thermal Shock Chamber to Research Center

Posted: January 19, 2018
Tenney Environmental, a global manufacturer of thermal-processing equipment, announced the shipment of a thermal shock chamber to a manufacturer of ceramic parts for the Aerospace, Medical, and Electronics markets. The Tenney chamber will be used for various types of thermal shock testing. The work chamber is 15” W x 15” D x 15” H.The maximum temperature of the hot chamber is 200°C and 40°C for the cold chamber. The minimum temperature for the hot chamber is above ambient and -73°C for the cold chamber. The “hot chamber” is on the top and the “cold chamber” is situated on the bottom.

Tenney Environmental Boasts Record Sales in 2017

Posted: December 08, 2017
Tenney/Lunaire Environmental has experienced impressive growth in 2017 with a record year in sales and shipments and an expanded global footprint. In anticipation of this growth, additional facility space was provided to the Tenney/Lunaire equipment line at the beginning of the year to accommodate production needs. Tenney/Lunaire orders in 2017 included both standard and custom environmental-testing chambers and rooms designed for temperature, humidity, altitude, vibration, steady state, and vacuum-testing requirements along with space chambers and thermal shock chambers. Tenney/Lunaire products were shipped to customers in the electronics, automotive, aerospace, and lab/research industries. They have seen significant growth in the space

Tenney Environmental Ships Space Simulation System to a Logistics Company

Posted: June 15, 2017
Tenney Environmental, a global manufacturer of environmental testing equipment, announced the shipment of a Vacuum / Temperature Space Simulation system to a logistics company. The outer structural shell of the environmental simulator is designed to resist one atmosphere of external pressure while under vacuum. The vessel has a 42” diameter and is 36.5” long. The temperature range of this space simulator is ­60°C to +155° C. The temperature uniformity is ±5°C. A fluid conditioning system is employed to temperature condition the chamber using an electric immersion heater and an LN2 Fluid Cooling System to heat and cool a circulating heat

Lunaire Environmental Ships Steady State Chambers to Technology Industry

Posted: April 25, 2017
Lunaire Environmental, a global manufacturer of thermal-processing equipment, announced the shipment of two (2) steady state temperature only chambers to the technology industry. The chambers can be used for various types of applications including stability, shelf life testing, pharmaceutical testing, packaging material testing, and incubation. The temperature rating of these steady state temperature chambers is 0°C +99°C and the work chamber dimensions are 33” W x 28” D x 15” H. These chambers are a CEO908-2 and the 908 is the smallest of four (4) chamber sizes. The other CEO sizes are the 916, 932, and 958. These models are