News

Tenney Environmental announced the shipment of a vacuum temperature space simulation system. This space simulator will allow the customer to bring the testing of their products in house. The customer manufactures laser guidance modules for satellites and other space equipment that is used to assure precise locations of equipment while they are docking together. The Tenney space simulation chamber utilizes a cascade cooling system and has a temperature range of -75°C to +125°C. It is constructed with a thermal shroud and thermal platen which will perform the thermal conditioning function. This vacuum chamber has an extremely low maintenance dry roots

Tenney Environmental announced the shipment of a two-zone walk-in temperature humidity cycling room. This environmental walk-in room will be used to replicate negative pressure housing conditions to test door locks during the design phase. The walk-in humidity cycling room has a heat rating of 6kW and utilizes horizontal air circulation. The interior is constructed with type 304 stainless steel and the cycling chamber consists of two rooms, a hot room and a cold room. The rooms are separated by an interior fixed wall with a sealed opening between the rooms. The interior wall has a standard door frame that the

Tenney Environmental is proud to announce its attendance at the West Coast’s premier space event, Space Tech Expo USA, in Pasadena, California on May 22-24, 2018. Space Tech Expo USA will feature over 250 exhibitors, offer a multitude of networking opportunities, and the chance to expand industry knowledge with free Open Tech Forum sessions. The expo has themes running over the three days focusing on Launch Systems – Addressing the Changing Landscape of the Launch Vehicle Industry; Satellite Systems - Emerging Technologies and Drivers of Demand; and Future Programs – Moving from Low Earth Orbit to a Deep Space Gateway

Tenney Environmental, a global manufacturer of environmental testing equipment, announced the shipment of three (3) Tenney Environmental Fast Change Rate Automotive Test Chambers. These test chambers will be used for temperature and humidity testing of automotive parts. The maximum temperature rating of the automotive test chambers is 180°C and the operating temperature range is -68°C to 180°C. The work chamber dimensions are 30” W X 28.8” D X 36” H. The fast change rate test chambers can transition the air temperature in remote chambers from 20°C to -40°C with a 30-minute transition rate. The automotive test chambers utilize a continuously

Tenney announced the shipment of an environmental walk-in chamber to a manufacturer of consumer products. The walk-in room will be used for R&D environmental testing of products prior to going to market. The maximum temperature rating of the test chamber is 80°C with an operating temperature range of 0°C to 80°C. The walk-in chamber has work chamber dimensions of 119.5” W X 123.5” D X 102” H and ±5.0% humidity control after stabilization based on an empty chamber. The relative humidity range is 20%-95% RH in the temperature range of 20°C to 80°C limited by a 5°C dew point. The

Tenney Environmental announced the shipment of a Reach-In Vacuum Temperature Cycling Chamber to the aerospace industry. The temperature cycling chamber will be used for temperature altitude testing of aircraft collision avoidance radars. The operating temperature range of this vacuum chamber is -70°C to 177°C with temperature control of +/- 1°C. and the altitude range is to 100,000 feet +/-2 mmHg. The work chamber dimensions are 36” W X 36” D X 36” H and is constructed with type 304 stainless steel. The through wall ports are continuously welded and a combination of fiberglass and polyurethane insulation surrounds the chamber to

Tenney Environmental announced the shipment of a Reach-In Thermal Shock Chamber to a research center for laboratory and technical R&D. The thermal shock chamber was purchased to run a variety of MIL-STD tests on various parts. The maximum temperature rating of the test chamber is 200°C with an operating temperature range of -73°C to 200°C in the bottom chamber and 65°C to 200°C in the top chamber. The work chamber dimensions of the chamber are 15” W X 15” D X 15” H, other sizes are available as well. The chamber features a 2-zone vertical air circulation and a control

Tenney/Lunaire Environmental has experienced impressive growth in 2017 with a record year in sales and shipments and an expanded global footprint. In anticipation of this growth, additional facility space was provided to the Tenney/Lunaire equipment line at the beginning of the year to accommodate production needs. Tenney/Lunaire orders in 2017 included both standard and custom environmental-testing chambers and rooms designed for temperature, humidity, altitude, vibration, steady state, and vacuum-testing requirements along with space chambers and thermal shock chambers. Tenney/Lunaire products were shipped to customers in the electronics, automotive, aerospace, and lab/research industries. They have seen significant growth in the space