News

Tenney Environmental, a division of Thermal Product Solutions, announced the shipment of a Tenney Environmental Walk-In Chamber to the defense industry. The chamber will be used for thermal cycling of steel parts prior to a radiographic x-ray analysis to check for defects. The chamber features a solid construction rated for outdoor installation, independent from the customer’s main facility. The walk-in environmental chamber has an operating temperature range of -85°F to 200°F and the capacity to process 9,000 lbs. of parts per load. The interior dimensions are 18’ W x 12’ D x 10’ H and the chamber was fully assembled

Tenney Environmental, announced the shipment of a custom thermal vacuum chamber and two (2) walk-in chambers for testing of large satellites. The chambers will simulate the conditions of space and provide the customer with the ability to perform large product testing in house. The space simulation system is a horizontal cylindrical vessel that is 16.5’ in length and 16’ in diameter. The unit is fully constructed with Type 304 stainless steel and the internal thermal shroud is made of double embossed stainless steel. The thermal vacuum chamber utilizes three (3) thermal fluid chillers for temperature conditioning and is controlled by

Tenney Environmental announced the shipment of reach-in thermal shock chamber to an electronics manufacturer. This chamber will be used for various types of thermal shock testing and is designed with a 2-zone vertical configuration. This thermal shock test chamber meets applicable test standards including MIL-STD202 Method 107, MIL-STD883 Method 1010, MIL-STD 750-1A, and more. The product under test is cycled between temperature extremes to expose faults in design or manufacturing. This cycling occurs by transferring the product basket between the vertical zones via an automated carriage transport system with a 200-pound load capacity. This test chamber features an 8 cubic

Tenney Environmental, a division of Thermal Product Solutions, announced the shipment of two (2) Tenney Environmental Walk-In Chambers to the defense industry. The chambers will be used for temperature and humidity testing large parts in a variety of shapes and sizes and they are designed for outdoor installation. The walk-in chambers are designed to maintain a relative humidity steady state condition of 95% at 160°F with a temperature control tolerance of +/- 2°F. They have the capacity to process 5,000 lbs of parts per load and an operating temperature range of -85°F to 200°F. These units have interior dimensions of

Tenney Environmental is pleased to announce a new partnership with Redline Chambers. Redline Chambers was recently acquired by Tenney’s parent company, Thermal Product Solutions, LLC (TPS). Redline Chambers is an American manufacturer of vacuum chambers and systems for the aerospace, defense, energy, electronics, and medical industries. The company is located in Salt Lake City, UT, and specializes in providing customers with state-of-the-art vacuum technology and leak testing solutions. TPS provides an expansive product offering for thermal processing and test solutions with brands including Baker Furnace, Blue M, Gruenberg, Tenney, Lindberg, MPH, Wisconsin Oven, and now Redline Chambers. TPS brands are

Tenney Environmental, a division of Thermal Product Solutions (TPS, LLC), is pleased to announce that the recent FDA enforcement policy supports the use of Tenney environmental chambers for bioburden reduction on N95 respirators during the Coronavirus (COVID-19) public health emergency. The FDA guidance document [1] supports the use of Dry Heat processing to reduce the risk of transmission of the SARS-CoV-2 virus and support limited reuse of NIOSH approved Filtering Facepiece Respirators. The FDA policy states that “Based on currently available evidence, dry heat at T = 75 °C for t=30 minutes should reliably achieve ≥ 3-log reduction in non-enveloped

Tenney Environmental, a division of Thermal Product Solutions, announced the shipment of a Tenney Environmental C-EVO Temperature and Humidity Cycling Test Chamber. Our C-EVO series of environmental reach-in chambers are capable of holding at and cycling through a range of temperature and humidity conditions. Standard capabilities of this product line include temperature conditions of -68°C to 180°C and humidity conditions of 20%RH to 95%RH within the temperature range of 20°C to 85°C limited by a 5°C dew point. Additional equipment can be added to upon request to extend these standard ranges as needed. Tenney’s C-EVO series of test chambers come

Tenney Environmental, a division of Thermal Product Solutions, announced the shipment of a Tenney Environmental Roll Up Refrigeration Module. The module has an operating temperature range of -68°C to 125°C. Relative humidity range of 20%-95% RH in the temperature range of 20°C to 70°C limited by a 5°C dew point. This specially designed refrigeration module has the following dimensions: 84” W x 84” D x 108” H. The interior is made from 20 gauge stainless steel and the exterior’s construction is 18 gauge cold rolled steel. The module’s simple bolt up design makes it Ideal for new or existing walk-in

Dear Valued TPS Customers, TPS is closely monitoring developments with respect to COVID-19, including information and guidance published by healthcare authorities around the globe. We are closely monitoring the guidance from State and Federal government offices as well from the Centers for Disease Control (CDC) for the entire United States and specifically in all of the locations where we currently manufacture and service our products. Additionally, we are also staying updated on conditions for our global locations as well. COVID-19 has not impacted TPS’s ability to deliver any products or services at this time from any of our locations. If